top of page
HOW DOES IT WORK ?
 

Electric Venturi (EV) is a very simple energy saving

solution for conveying a broad range of products.

​

  • Electric blower flows air through the inlet (1) into the chamber (2). Then it is injected into the throat through the accelerating section (3).

​

  • High speed flow of air create a vacuum at the intake (4) which draws materials in and accelerates it through the unit (5) at long vertical or horizontal distances.​

​
 

​
 

Click pic to zoom it

ELECTRIC VENTURI & ENERGY SAVING FOR PNEUMATIC CONVEYING 
WORKING
INSTALLATION
APPLICATIONS
ENERGY SAVING

​

  • Electric Venturi GUERIN can reduce your conveying energy cost of 90 %. Classical venturis for small materials continous conveying are using compressed air from factory's local network.

​

  • In 95% of configurations, air is pressured at 7 bars, unlike EV that needs only 0.05 bars and that uses an electric blower to generate the air flow pressure.
     

  • As example, EV4" (100mm) only needs 0.7 to 1.5 KW where a compressed air venturi burns 8 KW on the compressor unit.
     

  • Blower of the EV is driven through an inverter, so  pressure and speed can be fine adjusted for  optimum conveying conditions & energy saving.

APPLICATIONS

Electric Venturi GUERIN is especially designed for conveying light materials from 20 to 100 mm :

​

  • Transport of medium and small components

  • Tablets, corks, caps, buttons, etc.

  • Tensioning of fibers / yarns

  • Transport of scrap trim, filling and emptying, etc.

  • Plastics, chemical / pharmaceutical products, foodstuff, chips, etc.

SPECIFICATIONS
Conveying :

  • For conveying line diameter from 2" to 6 "

  • Useful length : until 40 m depending on your product

  • Air flow speed adjustable for soft manutentions

  • For light products up to 100 mm

  • High throughput capacity
     

Electric Venturi :

  • Execution stainless steel

  • Connections 3" to 6" to fit standard hose, flanges options

  • Food grade, ATEX options

  • Low maintenance

  • Easy installation

  • Eco design (Directives 2014/30/CE)

  • EV can be set for low speed conveying as required for your delicate products

  • Each manufactured EV is callibrated on a bench test for the best efficency with your specific products

SERVICING

  • ENERGY SAVING

       EV & EC Technology can replace air compressed                    conveying system for clever energy

  • Feasibility study
    As each product has their own specificities for conveying, this can be evaluated on our bench test for your needs

  • Machinery prototyping 
    Specific machines for your specific needs

SERVICING
bottom of page